Olympus VS120 - Manual (Page 15)

Preparations before Starting Observation
11 Page
2-3 Setting a slide glass specimen
2-3-1 VS120-S1/S5
VS120-S1 VS120-S5
1. Open the specimen holder by pulling the specimen holder open/close slider (1)
toward you. Set a slide glass specimen in place.
 VS120-S1: Set a slide glass specimen such that its longer side faces front and
the label (2) is on the left side.
 VS120-S5: Set a slide glass specimen such that its shorter side faces the
front and the label (2) is toward the front.
Set slide glass specimens in place with the cover glass facing up
(facing the objective lens). If the cover glass is facing down, the
specimen cannot be brought into focus.
Take care that you do not touch the objective lens.
2. Gently return the specimen holder open/close slider back to its original position
and check that the specimen is securely seated and not tilted.
3. In the case of the VS120-S5, set the required number of slide glass specimens in
the same manner as described in steps 1 and 2.
This completes the preparations before starting observations.
Start observations and acquire images by following the instructions given in
the [simple operation] manual.
NOTE
NOTE
(1) (2)
(1)
(2)