ZyXEL Communications NWA570N - Manual (Page 96)

Chapter 9 Product Specifications and Wall-Mounting Instructions
ZyXEL NWA570N User’s Guide
96
Firmware Specifications
Recommended type of
screws for wall-mounting
M3 Tap Screw
Certifications Safety
ANSI/UL-1950 3rd, CSA C22.2 No. 950 3rd, EN60950
(1992+A1+A2+A3+A4+A11), IEC 60950 3rd
EMI
FCC Part 15 Class B, EN55022 Class B, EN61000-3-2, EN61000-3-3
EMS
EN61000-4-2/3/4/5/6/8/11
Table 29 Hardware Specifications (continued)
Table 30 Firmware Features
FEATURE DESCRIPTION
Default IP Address 192.168.1.2
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
Device Management Use the web configurator to easily configure the rich range of features on
the NWA570N.
FTP//Web for firmware downloading and configuration backup and
restore.
Limitation of client connections (# is configurable, default: unlimited)
Intra BSS Block (enable/disable)
Output Power Management (4-levels)
Wireless Functionality Allows IEEE 802.11n draft 2.0 and either IEEE 802.11b or IEEE 802.11g
wireless clients to connect to the NWA570N wirelessly. Enable wireless
security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect
your wireless network.
Note: The NWA570N may be prone to RF (Radio
Frequency) interference from other 2.4 GHz devices
such as microwave ovens, wireless phones,
Bluetooth enabled devices, and other wireless LANs.
Operating Modes Access Point
Client
Bridge (up to four bridge links supported)
Access Point and Repeater
Security WPA and IEEE 802.1x security (EAP-TLS, EAP-TTLS, LEAP,. EAP-
PEAP and Win XP PEAP included)
64/128/152-bits WEP
WPA/WPA2 support based on 802.11i standard
Dynamic WEP key exchange
MAC address filtering through WLAN (supports up to 32 MAC address
entries
AES support