ZyXEL Communications NWA570N - Manual (Page 35)

ZyXEL NWA570N User’s Guide
35
C
H A P T E R
3
Wizard
This chapter shows you how to configure the ZyXEL Device’s basic features using the wizard.
3.1 Using the Wizard
The wizard consist of a series of screens to help you configure your ZyXEL Device for
wireless stations to access your wired LAN.
Use the following buttons to navigate the Wizard:
No configuration changes will be saved to the ZyXEL Device until you click Finish.
3.1.1 Wizard: Basic Settings
First, log into the ZyXEL Device as shown in Section 2.2 on page 31 .
Click Wizard Setup to display the first wizard screen shown next. Refer to the System
Screens chapter for more background information.
1 Enter a descriptive name to identify the device in the Ethernet network.
2 Select Obtain IP Address Automatically if you want to put the device behind a router
that assigns an IP address. If you select this by mistake, use the RESET button to restore
the factory default IP address.
3 Select Use fixed IP Address to give the device a static IP address. The IP address you
configure here is used for management of the device (accessing the web configurator).
4 Enter a Subnet Mask appropriate to your network and the Gateway IP Address of the
neighboring device, if you know it. If you do not, leave the Gateway IP Address field
as 0.0.0.0.
Back Click Back to return to the previous screen.
Next Click Next to continue to the next screen.