ZyXEL Communications NWA570N - Manual (Page 28)

Chapter 1 Introducing the ZyXEL Device
ZyXEL NWA570N User’s Guide
28
• Back up the configuration (and make sure you know how to restore it). Restoring an
earlier working configuration may be useful if the device becomes unstable or even
crashes. If you forget your password, you will have to reset the ZyXEL Device to its
factory default settings. If you backed up an earlier configuration file, you would not have
to totally re-configure the ZyXEL Device. You could simply restore your last
configuration.
1.5 LEDs
Figure 7 LEDs
The following table describes the LEDs on the ZyXEL Device.
Table 1 Front Panel LED Description
LED COLOR STATUS DESCRIPTION
POWER Green Blinking The ZyXEL Device is not ready or booting.
On The ZyXEL Device has booted successfully and is receiving
power.
Off The ZyXEL Device is not receiving power.
ETHERNET Green Blinking The ZyXEL Device is sending/receiving data.
On The ZyXEL Device has a successful 10 Mbps Ethernet
connection.
Amber Blinking The ZyXEL Device is sending/receiving data.
On The ZyXEL Device has a successful 100 Mbps Ethernet
connection.
Off The ZyXEL Device does not have an Ethernet connection.
WLAN Green Blinking The ZyXEL Device is sending or receiving data through the
wireless LAN.
On The ZyXEL Device is ready, but is not sending/receiving data.
WPS Green On The ZyXEL Device has a WPS connection with another WPS-
enabled device.
Blinking The ZyXEL Device is setting up a WPS connection with another
WPS-enabled device.
Off The ZyXEL Device has no WPS connection or has failed to set
up a WPS connection with another WPS-enabled device.