beautypg.com

3 back to factory defaults, 5 f/w upload screen – ZyXEL Communications NWA570N User Manual

Page 87

background image

Chapter 7 Management Screens

ZyXEL NWA570N User’s Guide

87

Figure 46 Configuration Upload Error

7.4.3 Back to Factory Defaults

Clicking the RESET button in this section clears all user-entered configuration information
and returns the device to its factory defaults. The following warning screen will appear.

Figure 47 Reset Warning Message

You can also press the RESET button on the rear panel to reset the factory defaults of your
device. Refer to the section on resetting the device for more information on the RESET
button.

7.5 F/W Upload Screen

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.img extension, for example, "zyxel.img". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click Management > F/W Upload to display the screen as shown. Follow the instructions in
this screen to upload firmware to your device.

Figure 48 Management: F/W Upload