ZyXEL Communications NWA570N - Manual (Page 66)

Chapter 6 Wireless Screens
ZyXEL NWA570N User’s Guide
66
Figure 33 Wireless Settings: Bridge
The following table describes the labels in this screen.
Table 15 Wireless Settings: Bridge
LABEL DESCRIPTION
Basic Settings
Operation
Mode
Select the operating mode from the drop-down list. The options are Access Point,
Wireless Client, Bridge and AP+Repeater.
Note: If you are configuring the device from a computer connected
to the wireless LAN and you change the device to use bridge
mode, you will lose your wireless connection when you click
Apply to save your settings. You must then connect to the
device through the wired network.
Channel The range of radio frequencies used by IEEE 802.11b/g wireless devices is called
a channel.
Select a wireless channel if interference from other nearby devices is a problem.
The NWA570N and wireless devices in your network must use the same channel.
Wireless
Mode
Select 802.11b/g to allow IEEE 802.11b and IEEE 802.11g compliant WLAN
devices to associate with the device.
Select 802.11n/g to allow IEEE 802.11n and IEEE 802.11g compliant WLAN
devices to associate with the device.