Xerox DC - Manual (Page 63)

Xerox Document Centre Reference Guide Page 4 - 11
4.
Ma
k
ing
C
opi
es
Paper Supply
This is where you choose the paper tray for your copy job. The trays
displayed on the Basic Copying tab are based on priorities set by the
Machine Administrator.
When Auto Paper is selected the machine will pick the correct
paper for your copy job.
If the Machine Administrator enabled Standard Size Required, the
machine may be required to use one of the following standard sizes
with the default type and color: 8.5 x 11 inch, 8.5 x 14 inch, or
11 x 17 inch.
If Standard Size Required is not active or if the image is not one of
the standard sizes, the machine will pick the smallest available size
with the default type and color that will accommodate the image.
More...
Pressing the More... button displays all paper stocks that are loaded
in the machine. The paper size, the orientation, the stock type and
the color are shown for each tray. Select a tray by touching the
associated line on the display. Refer to page 10-13 for more
information on Tray Type.