Original input, Original input -18, Auto -18 manual platen input -18 – Xerox DC User Manual
Page 108
Page 5 - 18
Xerox Document Centre Reference Guide
Original Input
This screen allows you the option to program the size of originals or
to allow the Document Centre to determine the size automatically.
Auto
Originals scanned, using the Document Feeder
Auto is the normal operating mode of the machine and allows the
machine to determine the size automatically.
Originals scanned, using the Document Glass
When originals are scanned from the Document Glass with the
cover open the system will scan the original twice. The first scan is
a prescan to determine the size and location of the original. The
second scan will capture the image.
Manual Platen Input
This option allows you to specify the dimensions of the document
scanning region. Use this for hard to detect originals like
transparencies or originals with dark borders.
Select a standard size or use Custom size to manually adjust the
scanning dimensions. The adjustment range is 1 x 1 inch to 17 x 11.7
inches.
The originals are assumed to be registered at the left rear corner of
the Document Glass.