Xerox DC - Manual (Page 299)

Xerox Document Centre Reference Guide Page 13 - 11
13.
Pap
er
&
Stock
(h) Performance is highly dependent on the quality of the
coated paper. Frequent use of coated papers, especially
lower quality papers, might cause increased
contamination in the machines which could degrade the
paper handling capability and the print or quality
performance for all papers.
(i) Image deletion defects might occur near the perforation,
especially if the perforation is parallel to the feed
direction.
(j) 2-sided copies or prints (duplex) should not be selected
when this stock is used.
(k) Recommend that running is from Bypass Tray (Tray 5)
only.
(l) Blank or preprinted covers are acceptable. Fusing
quality and Fix level images on 65 lb. cover stock,
vellum Bristol papers and other textured surface stock
will be poor. This stock is not recommended for images.