Xerox DC - Manual (Page 298)

Page 13 - 10 Xerox Document Centre Reference Guide
** Same performance as shown in Table 1 for the
corresponding paper sizes.
(d) Refer to Table 5 or to the paper tray label for the correct
paper loading orientation.
(e) Embossed letterhead may cause degraded paper
handling, and possibly minor image deletion defects
near the embossed area on either side of the paper.
(f) Refer to Table 5 for more information.
(g) This note is not used.
GBC-brand or pre-punched LEF
with rectangular holes: (holes on long edge) SEF
This type of paper only works when the
holes are at the rear of the paper tray.
X
❍ (d)
Never Tear type ❑
Drafting film ❑
Perforated: perforations are parallel to the feed direction
perforations are perpendicular to the feed direction
❍
❑
(i)
(i)
Envelopes (standard medium to large letter size) X
Tabs X
Carbonless ❑
Textured Papers, Vellum Bristol papers X (l)
Smooth Cover Index Stock ❍
Window Stock X
Table 3: Non-standard paper performance
Paper loaded in a tray,
with holes at rear of tray