Xerox DC - Manual (Page 205)

Xerox Document Centre Reference Guide Page 10 - 43
10
. Too
ls
Resetting the Feed Roll Cartridge Counters
NOTE The Paper Feed Roll counter must be reset whenever a Feed Roll is
replaced. If the counters are not reset, paper misfeeds will likely
occur from the paper tray with the newly changed Feed Roll.
To reset the counters follow the instructions below:
1. Press the Access button.
2. Enter the Access login password. Press the Go to Tools button.
3. Select More to access the second tools screen.
4. Select Supplies Management.
5. Select Feed Roll Cartridge Replacement. The following
screen should appear. This screen must be showing to reset a
Feed Roll counter.
6. After you replace the Feed Roll and close the tray, a pop-up
screen will appear.
7. Confirm the Cartridge replacement on the pop-up screen. This
will reset the counter.
8. Select Close.
9. Select Exit Tools.
10. Return the old Feed Roll Cartridge to Xerox.