Xerox DC - Manual (Page 327)

Xerox Document Centre Reference Guide Page 15 - 9
1
5. Pr
obl
em So
lving
Output
Quality
The machine did not
enlarge an 8 1/2 x 11 inch
document to fill an 11 x 17
inch page l Ensure that the correct tray is selected.
l 11 x 17-inch paper can be loaded in the
trays short edge feed only. Select Reduce/
Enlarge, More...then Custom then Auto%.
l Orient the original SEF. If using the
Document Feeder, ensure the document
Size is correctly defined. Refer to page 10-
28 for more information.
Stray marks or black marks
from three-hole punched
originals are not removed l Use the Edge Erase to erase the edge with
the drilled holes.
l Copy from the document glass with the
Document Cover down.
Images are out of sequence
or upside down when the
Booklet Creation Feature
is used l Ensure that the originals are in the correct
sequence.
l Feed LEF originals to SEF orientated paper
stock.
l Enable the display options for Booklet
Creation and ensure that the correct
sequence is selected (i.e., Left to Right or
Right to Left).
The output is blank Check the feeding of the originals. Check that
they are:
l Loaded in the Document feeder prior to
pressing Start.
l Loaded face up either in the Document
Feeder or face down on the Document
Glass.
Problem Symptom Recommendation