Xerox DC - Manual (Page 297)

Xerox Document Centre Reference Guide Page 13 - 9
13.
Pap
er
&
Stock
Table 3 describes the performance of a variety of non-standard
paper and media. You may run this type of media by following the
guidelines below and if the dimensions of the media are within the
size limits previously discussed for standard paper.
Legend and Footnotes
The following symbols represent both the expected paper handling
and copy quality performance in typical operating environments.
● = Best performance.
❍ = Good performance.
❑ = Fair-good performance. Significant performance
degradation is likely, particularly paper handling.
X = Not recommended. Exceeds design specifications.
Unacceptable performance likely.
Table 3: Non-standard paper performance
Throughput Material Rating Notes
Letterhead ** (d, e)
Pre-printed forms ** (d)
Pre-drilled/pre-punched holes (standard locations) ** (d)
Coated paper ❍ - ❑ (h)
Mylar reinforced: LEF (Mylar on long edge)
SEF ❑
X
Transparencies:
Clear/plain
Non-removable white stripe
Removable stripe:
LEF
SEF
Paper backed:
X
❑
❑
X
X
(j)
(j)
(j)
Labels: LEF
SEF ❍- ❑
X
(d, k)