Xerox DC - Manual (Page 268)

Page 12 - 16 Xerox Document Centre Reference Guide
Measurements
Units Inches or mm Inches Sets the appropriate
measurement units.
Numeric
separator
Comma or Period Comma Sets the standard numeric
separator.
Set Time and
Date Time
12 -24 hr
Date
mm/dd/yy
dd/mm/yy
yy/mm/dd
24 hr
dd/mm/yy
Use this function to set and
format the date and time used
by the machine.
To modify the date and time
settings, follow the
instructions displayed on this
feature.
Timers
System
Timeout
Disable or Enable
1 to 10 mins
Enable, 1 minute Controls the amount of time
until the Touch Screen is reset
to the default settings.
Incomplete
Scan
Disable or Enable
1 to 10 minutes
Enable, 3
minutes Controls the amount of time
between an incomplete job that
is partially scanned into
memory and its deletion from
memory.
If a job is partially scanned into
memory and the originals have
been removed from the
Document Feeder for this
amount of time, the job will be
deleted.
Auto Resume Disable or Enable
0.25 to 2 minutes.
Enabled
0.5 minutes.
Controls the amount of time
that elapses between when a
job is paused and when it will
resume printing automatically.
Table 8: System Settings Defaults
Feature Area Options Factory Default Explanation and Notes