Xerox DC - Manual (Page 302)

Page 13 - 14 Xerox Document Centre Reference Guide
Transparencies Presentations l Use white-striped transparencies. Do not use
clear or paper-backed transparencies.
l It is recommended that transparencies be fed
from the Bypass Tray (Tray 5) or from Tray 1
on machines without a Bypass Tray.
l Refer to the label on the tray for the
orientation of striped transparencies.
l When using transparencies with removable
stripes, load with the stripe up in Tray 5 and
the stripe down in Tray 1.
l Do not duplex.
Labels Self-adhesive
labels for
envelopes and
packaging l Do not duplex.
l For best results, feed labels into the machine
LEF only.
Labels pose a special problem because,
depending on the number of labels per sheet,
there is an opportunity for the label to
separate from the backing while inside the
machine.
l Load face-up in Trays 1- 4.
Load face-down in Trays 5 - 6.
Table 5: Loading Special Stock
Stock Type Common Uses Recommendation