Xerox DC - Manual (Page 175)

Xerox Document Centre Reference Guide Page 10 - 13
10
. Too
ls
Tray Settings
Use this screen to view and change the setup of each tray. Select a
tray from the scrolling list and then select the Change Description
button to change the Tray Type, Priority, or Auto Selection.
Tray Type
A Fully Adjustable tray allows a user to program any paper
attributes. The machine will detect the size and LEF/SEF
orientation, and the user changes the type and color through a
pop-up screen that appears after a tray is closed.
A Dedicated tray requires that the same paper always be used in
this tray. The Machine Administrator assigns the paper size,
LEF/SEF orientation, type, and color that must be used.
A Size Only tray is available only on the DC Model. The
machine detects the size and LEF/SEF orientation. However,
type and color descriptions are not programmable with this
setting. The machine assumes that the default type and color are
contained in this tray.
Tools Screen 1
System Settings 1
Tray
How to get here
Tray Management
Tray Settings
System Settings
Management