7 using ftp or tftp to back up configuration, 1 using the ftp commands to back up configuration, 6 restart – ZyXEL Communications P-2602R-DxA Series User Manual
Page 241
P-2602R/RL-DxA Series User’s Guide
Chapter 22 Tools
241
Figure 136 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to
for more information on the RESET button.
22.6 Restart
System restart allows you to reboot the ZyXEL Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.
Figure 137 Restart Screen
22.7 Using FTP or TFTP to Back Up Configuration
This section covers how to use FTP or TFTP to save your device’s configuration file to your
computer.
22.7.1 Using the FTP Commands to Back Up Configuration
1 Launch the FTP client on your computer.
2 Enter “
open
”, followed by a space and the IP address of your ZyXEL Device.