ZyXEL Communications P-2602R-DxA Series - Manual (Page 135)

P-2602R/RL-DxA Series User’s Guide
Chapter 10 Voice 135
10.13 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone.
Figure 66 Phone > Analog Phone > Advanced
Each field is described in the following table.
PSTN Line (“L”
models only)
Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Note: When the ZyXEL Device does not have power, only the
phone connected to the PHONE 2 port can be used for
making calls. Ensure you know which phone this is, so that in
case of emergency you can make outgoing calls.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.
Table 41 Phone > Analog Phone
LABEL DESCRIPTION
Table 42 Phone > Analog Phone > Advanced
LABEL DESCRIPTION
Analog Phone This field displays the phone port you see in this screen.
Voice Volume
Control