ZyXEL Communications P-2602R-DxA Series - Manual (Page 238)

P-2602R/RL-DxA Series User’s Guide
238 Chapter 22 Tools
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 130 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
Figure 131 Error Message
22.5 Backup and Restore
See Section 22.7 on page 241 and Section 22.8 on page 244 for transferring configuration files
using FTP/TFTP commands.
Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.