ZyXEL Communications P-2602R-DxA Series - Manual (Page 194)

P-2602R/RL-DxA Series User’s Guide
194 Chapter 16 Bandwidth Management
16.8.1 Rule Configuration
Click the Edit icon or User define in the Service field to configure a bandwidth management
rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity (bandwidth
budgets) to specific applications and/or subnets.
Figure 97 Bandwidth Management Rule Configuration
See Appendix E on page 293 for a list of commonly-used services. The following table
describes the labels in this screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 71 Bandwidth Management: Rule Setup (continued)
LABEL DESCRIPTION
Table 72 Bandwidth Management Rule Configuration
LABEL DESCRIPTION
Rule Configuration
Active Select this check box to have the ZyXEL Device apply this bandwidth
management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.
Rule Name Use the auto-generated name or enter a descriptive name of up to 20
alphanumeric characters, including spaces.