ZyXEL Communications Prestige 642R Series - Manual (Page 83)

Prestige 642R Series ADSL Router
6-4 IPX Configuration
6.3 IPX Ethernet Setup
From Menu 3 – Ethernet Setup, select option 3 to got to Menu 3.3 - Novell IPX Ethernet Setup as
shown in Figure 6-3.
Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup
The following describes the Novell IPX Ethernet Setup menu.
Table 6-1 Novell IPX Ethernet Setup Fields
FIELD DESCRIPTION OPTIONS
Seed Router Determines if your Prestige is to act as a seed router. Yes or No
Frame Type Enable/Disable the individual frame type.
Remember to enable only the ones that are actually used on your
network. 802.2
802.3
Ethernet II
SNAP
IPX Network
# If your Prestige is a seed router, enter a unique network number for each
frame type enabled.
Press [ENTER] at the message [Press ENTER to Confirm . . . ] to save your configuration, or press
[ESC] at any time to cancel.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.