ZyXEL Communications Prestige 642R Series - Manual (Page 41)

Prestige 642R Series ADSL Router
2-10 Hardware Installation & Setup
Figure 2-10 Menu 1 - General Setup
Table 2-4 General Setup Menu Fields
Field Description Example
System Name Choose a descriptive name for identification purposes. This name can
be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes “-” and underscores "_" are accepted. P642
Location
(optional) Enter the geographic location (up to 31 characters) of your Prestige. MyHouse
Contact Person's
Name (optional) Enter the name (up to 30 characters) of the person in charge of this
Prestige. JohnDoe
Protocols: Press [SPACE BAR] to toggle routing on or off for the individual
protocols.
Route IP Set this field to Yes to enable IP routing. You must enable IP routing
for Internet access.
Yes/No
Route IPX Set this field Yes to enable IPX routing. Yes/No
Bridge Turn on/off bridging for protocols not supported (e.g., SNA) or not
turned on in the previous Route fields.
Yes/No
2.11 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the Main
Menu, enter 3 to open Menu 3.
Menu 1 - General Setup
System Name= ?
Location=
Contact Person's Name=
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel: