beautypg.com

ZyXEL Communications Prestige 642R Series User Manual

Page 56

background image

Prestige 642R Series ADSL Router

Internet Access

3-13

Table 3-5

Internet Access Setup Menu Fields

Field

Description

Options/E.G.

ISP’s Name

Enter the name of your Internet Service Provider, e.g., myISP.
This information is for identification purposes only.

e.g., MyISP

Encapsulation

Press [SPACE BAR] to select the method of encapsulation
used by your ISP.

PPPoE, PPP,
RFC 1483 or
ENET ENCAP.

Multiplexing

Press [SPACE BAR] to select the method of multiplexing used
by your ISP - either VC-based or LLC-based.

VC-based LLC-
based

Service Name

This is valid only when you have chosen PPPoE
encapsulation. If you are using PPPoE encapsulation, then
type the name of your PPPoE service here.

poellc

VPI #

Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.

e.g., 0

VCI #

Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.

e.g., 35

My Login

Enter the login name that your ISP gives you. If you are using
PPPoE encapsulation, then this field must be of the form

user@domain

where domain identifies your ISP.

e.g., tarbuck

My Password

Enter the password associated with the login name above.

***

Single User Account

Press [SPACE BAR] to enable or disable SUA. Please see
the following section for a more detailed discussion on the
Single User Account feature.

Yes/No

IP Address

Assignment

Press [SPACE BAR] to select Static or Dynamic address
assignment.

Static /
Dynamic

IP Address

Enter the IP address supplied by your ISP if applicable.

e.g.,
192.168.1.1

ENET ENCAP

Gateway

Enter the gateway IP address supplied by your ISP if
applicable.

e.g.,
192.168.1.100

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [ESC] at any time to cancel.

At this point, if all your settings are correct your Prestige should connect automatically to the Internet. If the
connection fails, note the error message that you receive on the screen and take the appropriate
troubleshooting steps.