Yamaha CLP-280 - Manual (Page 97)

CLP-280/270 Owner’s Manual
97
Detailed Settings
Message List
Message Meaning
This message appears when you record or edit the protected song
and select another song. The recorded/edited protected song cannot
be saved. The song will be deleted when you select another song.
You tried to perform another operation before saving the recorded
song to storage memory or an external device. If you continue the
operation, the recorded song will be lost. To delete the new record-
ing, press the B [– (NO)] button. To keep the recording, press the B
[+ (YES)] button. The Clavinova displays the “Save” parameter
screen. Save the recorded song and proceed to another operation.
This message will appear if a problem is found with the song data
when you select a song or while the song is playing. In this case, rese-
lect the song, and try once again to play it back. If the message still
appears, the song data may have been damaged.
1. This message will be displayed if current memory fills up during
recording. Recording will stop automatically at this point. The
data that had been recorded up to that point will remain. This
message will also be displayed when you attempt to enter Record
mode for additional recording if that song already occupies all of
current memory. In this case, additional recording will not be pos-
sible. If there is an already-recorded part that you do not need to
keep, you can use “ChannelClear” (page
73) to delete the
unneeded part, so that you will then be able to record the equiva-
lent amount of additional material.
2. This message will be displayed when you select a song if that song
is larger than the capacity of the current memory (page 100). This
song cannot be loaded into the CLP-280/270, and cannot be
played back. Please select a different song.
This message prompts you to start the operation. To start, press the
B [+ (YES)] button. Press the [EXIT] button to cancel the operation.
This message prompts you to confirm the execution. Press the B [+
(YES)] button to continue. Press the B [– (NO)] button to cancel.
This message appears when the number of files and folders exceeds
the system limit. The maximum number of files/folders which can
be stored in a folder is 250. Try again after deleting/moving the
unnecessary file(s).
You tried to perform a file- or drive-related operation using an
unformatted media. Eject the media, format it using the “Format”
parameter (page 52), then try again.
SongChanged Clear?
SongChanged Save?
SongError
SongTooBig
Start?-->
Sure?-->
SystemLimit
UnformattedDrive