Yamaha CLP-280 - Manual (Page 93)

CLP-280/270 Owner’s Manual
93
Detailed Settings
Message List
The messages are listed in alphabetical order.
Message Meaning
• This message appears when data has failed to be written or loaded
to the Storage memory or USB storage device. When you write or
load data via USB storage device, check the USB cable connection
and try again. If you still see this message, the Storage memory/
media/device may have malfunctioned or may be damaged.
• This message appears when a Read-Only file is selected to be over-
written. The file cannot to be overwritten.
When you delete a folder, this message asks you whether you want to
delete all of the files in that folder. To delete all files in the folder,
press the D [+ (YES)] button. To cancel, press the D [– (NO)] but-
ton.
This message will appear when there is insufficient empty space in
backup memory. Turn the power switch off and turn it on again to
delete unnecessary backup data.
This message means that automatic adjustment of iAFC is not possi-
ble and the settings reset to their default values. In this case, perform
the automatic adjustment once again.
This message means that automatic adjustment of iAFC is not possi-
ble because no sound is output from the rear speaker. In this case if
the “Speaker” setting is Off, turn “Speaker” On. If “Speaker” is set to
Normal and headphones are connected, unplug the headphones.
This message will appear to confirm start of the iAFC calibration.
When calibrating, a test tone will sound from the instrument.
This message confirms that the operation has been cancelled.
This message appears when you do the following operation to a pro-
tected song:
• Overwrite (protected songs cannot be overwritten)
• Save with a new name (protected songs cannot be used with
“Save as” function)
• Delete (this message confirms that the protected song will be
deleted)
• Rename (renamed protected songs may not be played back)
This message is displayed following the message “Executing.” The
Clavinova’s internal processing is complete. You may proceed to the
next step.
AccessError
AccessError
AllFiles?-->
BackupMemoryFull
CalibrationError
DefaultReset
Calibration
Speaker sound is off
Calibration Sure?-->
Test sound is output.
Canceled
Caution ProtectedSong
Completed