Yamaha CLP-280 - Manual (Page 46)

46
CLP-280/270 Owner’s Manual
Basic Operation
Handling files such as deleting song files ... [FILE/SONG SETTING]
Saving recorded songs to a USB storage device ... [Save]
Recorded songs are automatically saved to Storage memory from Current memory, so normally you won’t
need to save songs using this function. However, if a “MemoryFull” message or “SystemLimit” message
appear, save the song to another device using this function.
Do not turn off the power before the save operation is completed. If you turn off the power to the Clavinova before the save operation
is completed, the recorded song will be lost.
Procedure
If a folder is displayed for an
External song, the [ / ] indica-
tor is displayed in the lower
right of the screen. In this case,
you can use the D [+] button to
open the folder. Press the D [–]
button to return to the previous
(upper) level.
See page 45 for information on basic operations.
The following is a detailed procedure of Step 4.
4-1
Select a save destination.
Press the D [–] button to display “DriveSelected?
→
” and press the C
[–][+] buttons to select a save destination (Storage memory or USB
storage device). After selecting a save destination, press the B [+
(YES)] button to fix it. Then press the B [+ (YES)] button to display
“Execute?
→ .”
4-2
Name the song.
To move the cursor (small underline), use the C [–][+] buttons.
To insert a space, press the C [–][+] buttons simultaneously.
To select a character at the cursor, use the D [–][+] buttons.
To delete a character, press the D [–][+] buttons simultaneously.
You can use up to 46 one-byte or 23 two-byte characters for a song
name. If the name is longer than the screen, use the C [–][+] buttons
to move the cursor and scroll the name.
4-3
Execute the operation.
Press the B [+ (YES)] button located next to “Execute?
→
.”
Follow the instructions on screen.
The song is automatically numbered.
If Storage memory contains one or more songs, and you save a new song, the
Clavinova automatically sorts the songs alphabetically and renumbers them.
B
D
NO YES
A
C
Save Selected?-->
M-001:NewSong001.MID /-
CAUTION
TIP
→
→
You can change the type of
characters on the screen using
the “CharacterCode” parame-
ter.
Do not turn off the power or
eject the media while “Execut-
ing” is shown in the display.
TIP
CAUTION
TIP