Yamaha CLP-280 User Manual
Page 64
64
CLP-280/270 Owner’s Manual
Basic Operation
Using a MIDI interface and the Clavinova’s MIDI terminals
Use a MIDI interface device to connect a computer to the Clavinova using
special MIDI cables.
CAUTION
Precautions when using the USB [TO HOST] terminal
When connecting the computer to the USB [TO HOST] terminal, make sure to
observe the following points. Failing to do so risks freezing the computer and cor-
rupting or losing data. If the computer or the instrument freezes, turn the power to
the instrument off and restart the computer.
• Before connecting the computer to the USB [TO HOST] terminal, exit from any
power-saving mode of the computer (such as suspended, sleep, standby), and
quit any open application software, also turns off the power to the instrument.
• Execute the following before turning the power to the instrument off or
unplugging the USB cable to/from the instrument/computer.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from the instrument. (Data is
transmitted only by playing notes on the keyboard or playing back a song.)
• While a USB device is connected to the instrument, you should wait for six
seconds or more between these operations: When turning the power of
the instrument off then on again, or when alternately connecting/discon-
necting the USB cable.
Computer
MIDI [IN] terminal
USB port or serial port
(modem or printer terminal)
MIDI [OUT] terminal
Instrument
MIDI cable
MIDI interface