Yamaha CLP-280 - Manual (Page 73)

CLP-280/270 Owner’s Manual
73
Detailed Settings
Detailed settings for recording and playback [FILE/SONG SETTING]
You can select a single channel to listen to its con-
tents. Playback starts from the first note.
See the procedure on page 69.
Setting range:
Ch1 - Ch16
The song data consists of 16 channels. A channel is assigned
to a part, so in this instrument, channel means the same as
part.
Even channels that contain no data are displayed.
You can delete data from each of 16 channels.
See the procedure on page 69.
Setting range:
Ch1 - Ch16, ALL (all channels)
The song data consists of 16 channels. A channel is assigned
to a part, so in this instrument, channel means the same as
part.
Even channels that contain no data are displayed.
When you clear all channels using the “ALL” parameter, you
can overwrite the song. In this case, the file which contains
song settings with no channel data is saved.
Auditioning the channels
[ChannelListen]
B
D
NO YES
A
C
ChannelListen Start?-->
Ch1
Playback continues as long as you press
and hold down this button.
Select the desired channel for playback.
TIP
TIP
Deleting data from each channel
[ChannelClear]
B
D
NO YES
A
C
ChannelClear Execute?-->
Ch1
Delete data.
Select the desired channel for deletion.
TIP
TIP
TIP
For information on the settings “RecStart” and “RecEnd,” see “Re-recording a song partially” on
page 37.
For information on the setting “RecExtraPartsCh,” see “Recording a performance of several differ-
ent parts” on page 39.