Yamaha CLP-280 - Manual (Page 79)

CLP-280/270 Owner’s Manual
79
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 69.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 78).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 69.
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
See the procedure on page 69.
Setting range:
–64 - +63
See the procedure on page 69.
Setting range:
–64 - +63
Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 69.
Setting range:
32 Hz - 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP
effect* [DSPDepth]
Adjusting the brightness of the
sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32