ZyXEL Communications PES-1014 - Manual (Page 71)

PES-1014 User’s Guide
Account 12-3
12.4 Change Password
Move the cursor over the Account link and click Change Password to display the Change Password screen
shown next. Use this screen to change your password.
Figure 12-4 Change Password
Table 12-3 Change Password Description
FIELD DESCRIPTION EXAMPLE
User ID The name (32 characters maximum) that identifies an individual account. This
field is case sensitive. Bruce
Old
Password Type the current password for this account. “*******” is displayed. This field is
case sensitive. ********
New
Password Type the new password for this account. “*******” is displayed. 32 characters is
the maximum length. This field is case sensitive. ********
Retype
Password Type the password again to make sure you entered it correctly. “*******” is
displayed. This field is case sensitive. ********
Click Apply to save your changes to working memory or click Reset to go to the previous configuration. Refer
to 3.4.4 for directions on saving your changes to flash memory before you restart the switch.
You can only change the password of the account that you are logged in on.
You cannot change the Null Account Password.