ZyXEL Communications AES-100 - Manual (Page 74)

AES-100 User’s Guide
11-4 Remote Management
♦ overheatOver Trap (defined in ZYXEL-MIB) :
This trap is sent periodically when the ADSL Networking Module is no longer overheated.
11.4.2 Trap Add Command
Syntax:
192.168.1.1 snmp> trap add []
where
= The password used by the ADSL Networking Module to authenticate itself
to the trap server.
= The IP address of the trap server.
[] = The optional port parameter is for specifying the UDP port number on the
server in case it is different from the default of port 162.
This command adds a trap server.
11.4.3 Trap Delete Command
Syntax:
192.168.1.1 snmp> trap delete []
This command deletes a trap destination. The parameters are the same as the trap add command.
11.4.4 Trap Flush Command
Syntax:
192.168.1.1 snmp> trap flush
This command deletes all trap destinations.
11.4.5 Trap List Command
Syntax:
192.168.1.1 snmp> trap list
This command lists all the trap destinations.