Factory default settings, Ip parameters, Console port – ZyXEL Communications AES-100 User Manual

Page 23: Snmp community strings, Console, telnet and ftp password, Adsl ports, Chapter 3 factory default settings, 1 ip parameters, 2 console port, 3 snmp community strings

Text mode
Original mode

AES-100 User’s Guide

Factory Default Settings

3-1

This section describes the factory default settings of the AES-100.

3.1

IP Parameters

• IP address = 192.168.1.1
• Subnet mask = 255.255.255.0
• Default gateway = 192.168.1.254

3.2 Console

Port

• Baud rate = 9600 bps
• Data bits = 8
• Parity = none
• Stop bit = 1
• Flow control = none

3.3

SNMP Community Strings

• Read = public
• Write = 1234

3.4

Console, Telnet and FTP Password

• 1234 (default)

3.5 ADSL

Ports

• Encapsulation: RFC 1483
• Multiplexing: LLC-based
• VPI: 0
• VCI: 33
• Enable/Disable State: Disabled
• Maximum Upstream Rate: 1024 Kbps for G.dmt, 512 Kbps for G.Lite

Chapter 3

Factory Default Settings