ZyXEL Communications AES-100 - Manual (Page 59)

AES-100 User’s Guide
IEEE 802.1Q Tagged VLAN Commands 8-3
Figure 8-1 Example: PVID Command Display
8.5.4 SVLAN CPU Command
Syntax:
192.168.1.1 vlan1q> svlan cpu []
where
= VLAN ID. Valid parameter range = [1 – 4094].
This command registers your CPU as a port member of the static VLAN with . To display the CPU static
VLAN identification, simply enter this command without parameters, as shown next.
192.168.1.1 vlan1q> svlan cpu
8.5.5 SVLAN List Command
Syntax:
192.168.1.1 vlan1q> svlan list
This command displays the static VLAN registration table. The following figure is an example of what is displayed
when you use this command.
Figure 8-2 Example: SVLAN List Command Display
For more information about the Svlan List command display, refer to the Svlan Setentry command (shown next).
vid port# ad_control tag_control
-------- ------- ------------ ------------
1 1 fixed Tag
2 normal UnTag
3 normal UnTag
2 1 normal UnTag
2 fixed UnTag
3 normal UnTag
3 1 normal UnTag
2 normal UnTag
3 fixed UnTag
pvid port#
----- -----
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
192.168.1.1 vlan1q>