Yamaha DM2000 - Manual (Page 157)

Naming Channels
157
DM2000 Version 2—Owner’s Manual
If the Name Input Auto Copy check box in the upper right corner is checked, the first four
characters of the name entered in the LONG column are automatically copied to the
SHORT column. Also, a name entered in the SHORT column is automatically copied to the
LONG column.
Output Channels
1 Use the DISPLAY ACCESS [OUTPUT PATCH] button to locate the Output
Channel Name page
2 Use the Parameter wheel, INC/DEC buttons, or the Master Layer and [SEL]
buttons to select the Output Channels.
3 Use the cursor buttons to select the Output Channel’s Long or Short name,
and then press [ENTER].
When the Title Edit window appears, edit the Output Channel name, and press OK when
you’ve finished. See “Title Edit Window” on page 54 for more information.
You can reset all Output Channel names back to their initial values by pressing the INI-
TIALIZE button.
If the Name Input Auto Copy check box in the upper right corner is checked, the first four
characters of the name entered in the LONG column are automatically copied to the
SHORT column. Also, a name entered in the SHORT column is automatically copied to the
LONG column.