Yamaha DM2000 - Manual (Page 119)

Aux Send Master Inserts
119
DM2000 Version 2—Owner’s Manual
Aux Send Master Inserts
Internal effects processors and external signal processors can be patched into the Aux Send
Masters by using the Inserts. See “Using Inserts” on page 135 for more information.
Compressing Aux Send Masters
Signal dynamics can be controlled by using the Aux Send Master Compressors. See “Com-
pressing Channels” on page 137 for more information.
Grouping Master Compressors
Aux Send Master Compressors can be grouped with the Compressors of other Output
Channels. See “Grouping Output Channel Compressors” on page 140 for more informa-
tion.
Muting Aux Send Masters (ON/OFF)
Aux Send Masters can be muted as follows.
1 Press the LAYER [MASTER] button to select the Master Layer.
2 Use channel strip [ON] buttons 9–20 to mute the Aux Send Masters.
The [ON] button indicators of Aux Send Masters that are on light up.
Grouping Master Mutes (ON/OFF)
Aux Send Master Mutes can be grouped with the Mutes of other Output Channels. See
“Grouping Output Channel Mutes (ON/OFF)” on page 149 for more information.
Settings Aux Send Master Levels
Aux Send Master levels can be set as follows.
1 Press the LAYER [MASTER] button to select the Master Layer.
2 Press the FADER MODE [FADER] button to select the Fader mode.
3 Use faders 9–20 to set the Aux Send Master levels.
Refer to the legend on the right side of the faders when setting Aux Send Master
levels.
Grouping Master Faders
Aux Send Master faders can be grouped with the faders of other Output Channels.
See “Grouping Output Channel Faders” on page 146 for more information.
Sending Aux Sends to Matrix Sends
Aux Send Master signals can be sent to the Matrix Sends. See “Matrix Sends” on page 121
for more information.
Delaying Aux Send Masters
Each Aux Send Master features a Delay function. See “Delaying Channel Signals” on page
141 for more information.
ON
50
40
30
20
15
10
10
5
0
5
70
60
50
40
30
20
15
10
5
0