Yamaha DM2000 - Manual (Page 112)

112
Chapter 10—Aux Sends
DM2000 Version 2—Owner’s Manual
Muting Aux Sends (ON/OFF)
1 Use the LAYER buttons to select the Input Channel Layers, and use the [SEL]
buttons to select the Input Channels.
2 Use the SELECTED CHANNEL AUX/MATRIX SEND [BANK] button to select
Aux 1–4, Aux 5–8, or Aux 9–12.
3 Use the SELECTED CHANNEL AUX/MATRIX SEND [ON] buttons to turn the
Aux Sends of the selected Input Channel on or off.
Aux Send Pages
You can view and set the Aux Send parameters of all Input Channels on the Aux Send pages.
Operation of the Aux Send pages in Variable and Fixed mode is explained separately.
Variable Mode
See page 110 for information on how to select Variable Aux mode.
1 Use the AUX SELECT [DISPLAY] button to select the Aux Send pages.
The Aux Send parameters for the 96 Input Channels are divided among four pages. The
Input Channel 1–24 Aux Send page in Variable mode is shown below. The layout of the
other three pages is the same.
2 Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends 1–12.
3 Use the cursor buttons to select the Input Channel Aux Send controls.
Input Channels can also be selected by using the Input Channel Layer buttons and [SEL]
buttons.
4 To turn Aux Sends on and off, select the rotary controls, and press [ENTER].
The rotary controls of Aux Sends that are turned off, appear gray, and “OFF” appears in
place of the level value. Aux Send levels can still be changed even when Aux Sends are off.
5 To set Aux Send levels, select the rotary controls, and use the Parameter
wheel or INC/DEC buttons.
To set Aux Send levels for all Input Channels to nominal, select the ALL NOMINAL button.
AUX / MATRIX SEND
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX 1 / MATRIX 1
AUX 5
AUX 9
AUX 2 / MATRIX 2
AUX 6
AUX 10
AUX 3 / MATRIX 3
AUX 7
AUX 11
AUX 4 / MATRIX 4
AUX 8
AUX 12
BANK
DISPLAY