Color calibration, Color calibration -2 – Xerox COLOR 490 User Manual

Page 92

Color Calibration Using ColorPort Utility Software

Xerox 490/980 CCF Printing System

6-2

Color Management Guide

Color Calibration

Before performing color calibration, set the cutter to A3 and ensure that all color settings for
both printers are set at 4 (C,M,Y,K).

Select the CMS Option Tool icon from the PC-GUI.

Select the [Print Colorimetric Pattern] tab.

Select the colorimetric pattern to print from the pull-down menu. For Calibration, select
(Eye-One iSis).

Select [Print].

Select [Yes] to continue. After printing is complete, select one sample of the following test
patterns and cut around the dotted lines neatly:

Test Pattern Names

For Upstream Halftone Dot

EyeOneiSis_up_Calib.rnd_1 (299)

EyeOneiSis_up_Calib.rnd_2 (299)

EyeOneiSis_up_Calib.rnd_3 (299)

For Downstream Halftone Dot

EyeOneiSis_dn_Calib.rnd_1 (299)

EyeOneiSis_dn_Calib.rnd_2 (299)

EyeOneiSis_dn_Calib.rnd_3 (299)