Xerox COLOR 490 - Manual (Page 57)

Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment
Color Management Guide 4-17
21. Select the [PDF] tab.
22. In the Page Size drop-down menu, select [Non-standard].
Note
In the following step, while using Inches is recommended, it is not required. Millimeters are
also supported by this documentation.
23. For Unit, select [Inch].
24. In the Width field type [5.6] (142 mm). In the Length field type [12.00] (305 mm).
25. In the Copies field, type [10].
26. Select [OK].