Color density adjustment, Color density adjustment -18 – Xerox COLOR 490 User Manual

Page 58

Pre-Calibration Engine Density Adjustment

Xerox 490/980 Color Continuous Feed Printing System

4-18

Color Management Guide

Color Density Adjustment

The purpose of the following procedure is to achieve the proper color density levels for optimum
color calibration.

Note

The following procedure must be performed:

•

For a Simplex System: One time.

•

For a Duplex System: One time for each printer.

Open the [Color Calibration Resources] folder that was copied to the Windows Desktop.

Select either the duplex or simplex test patterns. The test patterns are named as follows:

For Simplex: [Simplex Xerox 490980 Color Test Pattern.pdf].

For Duplex: [Duplex Xerox 490980 Color Test Pattern.pdf].

Test Pattern