For simplex systems, For duplex systems, For simplex systems -30 for duplex systems -30 – Xerox COLOR 490 User Manual
Page 90
Color Calibration Process for v1.1.6 Software
Xerox 490/980 Color Continuous Feed Printing System
5-30
Color Management Guide
Apply a Calibration TRC to existing
Queues using the User TRC option
For the queues that you would like calibrated, follow this procedure.
For Simplex Systems
1.
On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing
System PC-UI, select [Queue Management].
2.
Double-click on an existing print queue from the list.
3.
Select the [Color] tab.
4.
In the Color Characteristics (Upstream) box, select [Setting].
5.
Under the User TRC drop-down menu, select the [Upstream.trc] file that was created
previously.
6.
Select [OK].
7.
Select [OK] again.
For Duplex Systems
1.
On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing
System PC-UI, select [Queue Management].
2.
Double-click on an existing print queue from the list.
3.
Select the [Color] tab.
4.
In the Color Characteristics (Upstream) box, select [Setting].
5.
Under the User TRC drop-down menu, select the [Upstream.trc] file that was created
previously.
6.
Select [OK].
7.
In the Color Characteristics (Downstream) box, select [Setting].
8.
Under the User TRC drop-down menu, select the [Downstream.trc] that was created
previously.
9.
Select [OK] again.