beautypg.com

Post-calibration density check, Post-calibration density check -28 – Xerox COLOR 490 User Manual

Page 88

background image

Color Calibration Process for v1.1.6 Software

Xerox 490/980 Color Continuous Feed Printing System

5-28

Color Management Guide

Post-Calibration Density Check

The purpose of the following procedure is to confirm that the proper color density levels have
been achieved for optimum color calibration.

Note

This procedure must be performed:

•

For a Simplex System: One time.

•

For a Duplex System: One time for each printer.

1.

Open the [Color Calibration Resources] folder that was copied to the Windows Desktop.

2.

Select either the duplex or simplex test patterns. The test patterns are named as follows:

a.

For Simplex: [Simplex Xerox 490980 Color Test Pattern.pdf].

b.

For Duplex: [Duplex Xerox 490980 Color Test Pattern.pdf].

Test Pattern

See also other documents in the category Xerox Printers: