Xerox COLOR 490 - Manual (Page 26)

CMS Option Tool Xerox 490/980 Color Continuous Feed Printing System
2-14 Color Management Guide
Comment
Any registered comments are listed in the properties of paper information.
Download Paper Information
Paper information can be downloaded to the printer. Select the paper information from the list
and select [Download]. A confirmation window will appear, select [Yes] to proceed. The color
resource of the selected paper information will download and be sent to the printer.
You can download paper information with calibration data to the printer. This data is generated
using previously generated calibration files and color measurement data. This data is specific to
the paper that is selected in the paper information list.
Select the check box and select a resource to be used when downloaded. Select any paper
information and then select [Download].
Change Paper Properties
To display the properties of a paper registered in the CMS Option tool, select [Properties]. The
window that displays is available to edit. The following options are available to change.
Paper name
The paper name displays.
Printer name
The printer name that has been registered on the GUI is displayed. The printer name can be
changed.
Standard/Custom paper
The paper name of either the standard or custom paper is displayed here.
Measurement time
All data from each color measurement is generated and these dates are listed here.
Resource creation time
The date and time when a color resource file has been created will be displayed.
Calibration On/Off
If calibration data is enabled or disabled, it will be displayed here.
Calibration mode
The calibration mode will be displayed here depending on if the configuration is for simplex or
duplex.