ZyXEL Communications Prestige 2602H Series - Manual (Page 71)

Prestige 2602H/HW Series User’s Guide
Chapter 3 Wizard Setup 71
Figure 16 Wizard Setup: Third Screen
Table 11 Wizard Setup: Voice Configuration
LABEL DESCRIPTION
Active Select this check box to have the Prestige use this SIP account. Clear the
check box to have the Prestige not use this SIP account.
SIP Number Enter your SIP number in this field (use the number or text that comes before
the @ symbol in a full SIP URI). You can use up to 127 ASCII characters.
SIP Local Port Use this field to configure the Prestige’s listening port for SIP. Leave this field
set to the default if you were not given a local port number for SIP.
SIP Server Address Type the IP address of the SIP server in this field. It doesn’t matter whether
the SIP server is a proxy, redirect or register server.
SIP Server Port Enter the SIP server’s listening port for SIP in this field. Leave this field set to
the default if your VoIP service provider did not give you a server port number
for SIP.
REGISTER Server
Address
Enter the SIP register server’s address in this field.
If you were not given a register server address, then enter the address
from the SIP Server Address field again here.
REGISTER Server Port Enter the SIP register server’s listening port for SIP in this field.
If you were not given a register server port, then enter the port from the
SIP Server Port field again here.
SIP Service Domain Enter the SIP service domain name in this field (the domain name that comes
after the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended
set characters.
Authentication User ID This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. You can use up to
95 ASCII characters.