ZyXEL Communications Prestige 2602H Series - Manual (Page 154)

Prestige 2602H/HW Series User’s Guide
154 Chapter 9 Voice Screens
1 When you are on the phone talking to someone, place the flash key to put the caller on
hold and get a dial tone.
2 Dial a phone number directly to make another call.
3 When the second call is answered, press the flash key, wait for the sub-command tone
and press “3” to create a three-way conversation.
4 Hang up the phone to drop the connection.
5 If you want to separate the activated three-way conference into two individual
connections (one is on-line, the other is on hold), press the flash key, wait for the sub-
command tone and press “2”.
9.13 Common Phone Port Configuration
Click PHONE in the navigation panel and then Common to display the following screen. Use
this screen to configure general phone port settings.
Figure 62 Phone Port Common
The following table describes the labels in this screen.
Table 45 Voice Common
LABEL DESCRIPTION
Country Settings Use the drop-down list box to select the country where your Prestige is located.
Immediate Dial Use immediate dial to have the Prestige make calls right away instead of waiting
for the dialing interval (the time period it waits to make sure you are done
pressing the keys).
In order to use immediate dial, enable it here. Then press the pound (#) key on
your telephone’s keypad after dialing a phone number (this has the Prestige
make the call right away).