ZyXEL Communications Prestige 2602H Series - Manual (Page 533)

Prestige 2602H/HW Series User’s Guide
Appendix K Log Descriptions 533
Table 206 RTP Logs
LOG MESSAGE DESCRIPTION
Error, RTP init fail The initialization of an RTP session failed.
Error, Call fail: RTP
connect fail A VoIP phone call failed because the RTP session could not be
established.
Error, RTP connection
cannot close The termination of an RTP session failed.
Table 207 FSM Logs: Caller Side
LOG MESSAGE DESCRIPTION
VoIP Call Start Ph[Phone
Port Number] <- Outgoing
Call Number Someone used a phone connected to the listed phone port to
initiate a VoIP call to the listed destination.
VoIP Call Established
Ph[Phone Port] -> Outgoing
Call Number Someone used a phone connected to the listed phone port to
make a VoIP call to the listed destination.
VoIP Call End Phone[Phone
Port] A VoIP phone call made from a phone connected to the listed
phone port has terminated.
Table 208 FSM Logs: Callee Side
LOG MESSAGE DESCRIPTION
VoIP Call Start from
SIP[SIP Port Number] A VoIP phone call came to the Prestige from the listed SIP
number.
VoIP Call Established
Ph[Phone Port] <- Outgoing
Call Number A VoIP phone call was set up from the listed SIP number to the
Prestige.
VoIP Call End Phone[Phone
Port] A VoIP phone call that came into the Prestige has terminated.
Table 209 Lifeline Logs
LOG MESSAGE DESCRIPTION
PSTN Call Start A PSTN call has been initiated.
PSTN Call End A PSTN call has terminated.
PSTN Call Established A PSTN call has been set up.