ZyXEL Communications Prestige 2602H Series - Manual (Page 184)

Prestige 2602H/HW Series User’s Guide
184 Chapter 14 Firewall Configuration
14.4.1 LAN to WAN Rules
The default rule for LAN to WAN traffic is that all users on the LAN are allowed non-
restricted access to the WAN. When you configure a LAN to WAN rule, you in essence want
to limit some or all users from accessing certain services on the WAN. See the following
figure.
Figure 71 LAN to WAN Traffic
14.4.2 WAN to LAN Rules
The default rule for WAN to LAN traffic blocks all incoming connections (WAN to LAN). If
you wish to allow certain WAN users to have access to your LAN, you will need to create
custom rules to allow it.
See the following figure.
Figure 72 WAN to LAN Traffic