ZyXEL Communications Prestige 2602H Series - Manual (Page 106)

Prestige 2602H/HW Series User’s Guide
106 Chapter 5 Wireless LAN (P2602HW Models)
5.8 Configuring RADIUS
To set up your Prestige’s RADIUS server settings, click WIRELESS LAN, RADIUS. The
screen appears as shown.
Figure 39 RADIUS
The following table describes the fields in this screen.
Password Enter a password of up to 31 printable characters (including spaces; alphabetic
characters are case-sensitive) if you’re using MD5 encryption and maximum 14 if you’re
using PEAP.
Back Click Back to go to the main wireless LAN setup screen.
Apply Click Apply to save these settings back to the Prestige.
Cancel Click Cancel to begin configuring this screen again.
Table 25 Local User Database (continued)
LABEL DESCRIPTION
Table 26 RADIUS
LABEL DESCRIPTION
Authentication Server
Active Select Yes from the drop-down list box to enable user authentication
through an external authentication server.
Server IP Address Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.