ZyXEL Communications Prestige 2602H Series - Manual (Page 100)

Prestige 2602H/HW Series User’s Guide
100 Chapter 5 Wireless LAN (P2602HW Models)
Figure 33 Wireless LAN: 802.1x/WPA: No Access Allowed
Figure 34 Wireless LAN: 802.1x/WPA: No Authentication
The following table describes the label in these screens.
5.6.1 Authentication Required: 802.1x
You need the following for IEEE 802.1x authentication.
• A computer with an IEEE 802.11 a/b/g wireless LAN adapter and equipped with a web
browser (with JavaScript enabled) and/or Telnet.
Table 21 Wireless LAN: 802.1x/WPA: No Access/Authentication
LABEL DESCRIPTION
Wireless Port
Control
To control wireless station access to the wired network, select a control method from
the drop-down list box. Choose from No Access Allowed, No Authentication
Required and Authentication Required.
No Access Allowed blocks all wireless stations access to the wired network.
No Authentication Required allows all wireless stations access to the wired network
without entering usernames and passwords. This is the default setting.
Authentication Required means that all wireless stations have to enter usernames
and passwords before access to the wired network is allowed.
Select Authentication Required to configure Key Management Protocol and other
related fields.
Back Click Back to go to the main wireless LAN setup screen.
Apply Click Apply to save your changes back to the Prestige.
Cancel Click Cancel to begin configuring this screen afresh.