beautypg.com

3 remote management and nat, 4 system timeout, 3 remote management and nat 40.4 system timeout – ZyXEL Communications Prestige 2602H Series User Manual

Page 409

background image

Prestige 2602H/HW Series User’s Guide

Chapter 40 Remote Management

409

40.3 Remote Management and NAT

When NAT is enabled:

• Use the Prestige’s WAN IP address when configuring from the WAN.
• Use the Prestige’s LAN IP address when configuring from the LAN.

40.4 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The Prestige automatically logs you out if the management session remains idle for longer
than this timeout period. The management session does not time out when it is continuously
updating the status in menu 24.1 or when sys stdio has been changed on the command

line.