2 manually assign a wep key, Figure 27 manually assign a wep key, Table 14 manually assign a wpa key – ZyXEL Communications P-2602HW(L) Series User Manual
Page 68: Section 3.3.2 on

P-2602H(W)(L)-DxA Series User’s Guide
68
Chapter 3 Internet and Wireless Setup Wizard
The following table describes the labels in this screen.
3.3.2 Manually Assign a WEP key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 27 Manually Assign a WEP key
Table 14 Manually Assign a WPA key
LABEL
DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Exit
Click Exit to close the wizard screen without saving.
This manual is related to the following products: